Products
Complete Models
What Caterpillar devices are compatible with 2530618 fuel injectors? Specially designed for Caterpillar C18 diesel engines, it is compatible with high-pressure common rail fuel systems for large equipment such as 777G mining trucks, 385C excavators, and G3520 generator sets. How to determine if the fuel injector needs to be replaced? If there is engine idle shaking, black smoke emission from the exhaust, sudden increase in fuel consumption (over 5%) or decrease in power, it is necessary to use a diagnostic instrument to detect the fuel injection pressure (standard value 2000 ± 50bar). If abnormal, it is recommended to replace it. Caterpillar C18 injector 2530618 adopts high-strength alloy needle valve and sulfur resistant coating technology, supporting 2200 bar high-pressure injection and precise control of fuel volume. Compatible with C18 engine, reducing fuel waste by 3%, improving combustion efficiency, and ensuring stable operation in high load scenarios such as mining and power generation. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
Which engine models are compatible with Caterpillar valve oil seals? Compatible with the full range of Caterpillar C1.1 to C32 engines, supporting valve systems for excavators (320D/336D), loaders (950H/966M), generator sets (G3512/G3520), and other equipment. How to determine if the valve oil seal needs to be replaced? If there is abnormal oil consumption (>0.5L/100h), blue smoke emission from exhaust, or valve guide wear (clearance>0.3mm), it is necessary to promptly detect and replace it. It is recommended to combine major maintenance every 10000-15000 hours. The Carter valve oil seal adopts a composite design of fluororubber and metal skeleton, which is resistant to high temperature and high pressure gas erosion at 180 ℃ and tightly seals the valve guide. Compatible with the entire range of engines, reducing oil leakage by 30%, anti-wear, leak proof, and extending engine life. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
What Caterpillar devices are compatible with 4N2572 fan blades? Specially designed for Caterpillar C7 engine, compatible with cooling systems for equipment such as 320D excavator, 966H loader, G3512 generator set, etc. How to determine if the fan blades need to be replaced? If there is insufficient heat dissipation (water temperature>105 ℃), abnormal vibration (increased noise), or blade cracking/deformation, it should be replaced in a timely manner. It is recommended to conduct maintenance checks on the radiator every 10000-15000 hours. The Carter C7 fan blade 4N2572 is made of high-strength nylon composite material, which is resistant to vibration and high and low temperatures (-40 ℃ to 80 ℃). Adapt to C7 engine, optimize aerodynamic design, improve heat dissipation efficiency by 15%, reduce noise and energy consumption, and ensure stable high-temperature conditions of the equipment. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
Which Caterpillar engines are compatible with the 1609874 cylinder liner water seal? Specially designed for Caterpillar 3408 diesel engines, compatible with models such as 3408B/3408C, suitable for cylinder liner and cylinder block sealing in mining trucks, large generator sets, and construction machinery (such as 773B dump trucks). How to determine if the cylinder liner water seal needs to be replaced? If there is abnormal consumption of coolant, oil emulsification (including water droplets), external water leakage from the cylinder block, or engine overheating, it should be checked in a timely manner. It is recommended to replace the engine every 15000-20000 hours in conjunction with major repairs to avoid cylinder failure caused by fluid leakage. The Caterpillar 3408 cylinder liner water seal 1609874 adopts a composite design of nitrile rubber and metal skeleton, which can withstand high temperature of 120 ℃ and water pressure of 1.5 bar, and tightly seal the cylinder liner and cylinder body. Compatible with 3408 engine, anti vibration, anti-corrosion, reduces coolant leakage, and ensures stable engine operation. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
Which diesel engine models are CAT air filters suitable for? Compatible with the full range of Caterpillar C1.1 to C32 diesel engines, supporting excavators (320GC/336D), loaders (950H/966M), generator sets (G3512/G3520), and agricultural machinery. How to determine if the air filter needs to be replaced? When the instrument panel of the device prompts the "AIR Filter" alarm, the intake resistance is greater than 5kPa, or the surface dust coverage of the filter element exceeds 80%, it needs to be replaced. It is recommended to check every 500 hours or every 200 hours in dusty environments. The air filter element of CAT diesel engine accessories adopts multi-layer composite filter paper and nano coating technology, which efficiently filters particles larger than 5 μ m (filtration efficiency 99.9%), is resistant to dust blockage and moisture, suitable for the entire series of diesel engines, reduces cylinder liner wear, and extends engine life. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
What Caterpillar engines are compatible with 22-0321 exhaust valves? Mainly suitable for Caterpillar C9 and C13 engines, widely used in the valve system of 336D excavators, 966H loaders, G3516 generator sets and other equipment. How to determine if the exhaust valve needs to be replaced? If there is a decrease in engine power, black smoke from the exhaust, idle shaking, or abnormal valve noise, it should be detected in a timely manner. It is recommended to replace it every 15000-20000 hours in conjunction with major repairs to avoid performance degradation caused by seal failure. Carter exhaust valve 122-0321 is forged from nickel chromium molybdenum alloy and strengthened with nitriding treatment for surface hardness, high temperature resistance (instantaneous high temperature), and corrosion resistance. Adapt to the C9/C13 engine, accurately control exhaust emissions, reduce valve wear, improve combustion efficiency, and ensure stable equipment operation. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
What Caterpillar C9 devices are compatible with the 4768769 high-pressure oil pump? Compatible with Caterpillar C9 engine, widely used in 336D excavators, 966H loaders, G3516 generator sets, and large construction machinery, supporting high-pressure common rail fuel systems. How to determine if the high-pressure oil pump of C9 engine needs to be replaced? If there is weak acceleration, fuel pressure fluctuation greater than 10%, abnormal noise from the fuel injector, or leakage from the pump body, it should be detected in a timely manner. It is recommended to replace the fuel system every 15000 hours in conjunction with major repairs to avoid engine damage caused by insufficient fuel supply. The Carter 4768769 high-pressure oil pump is compatible with the C9 engine, using high-strength alloy and precision plunger design, which is resistant to high pressure, wear, stable fuel supply, reduces fluctuations, improves combustion efficiency, and extends engine maintenance cycles. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
What Caterpillar equipment is compatible with 5134490 oil-water separator? Mainly compatible with Caterpillar C4.4, C6.6, C7.1 engines, supporting excavators (320GC/336GC), loaders (950GC), and generator sets (100-500kVA), compatible with various fuels such as diesel and biodiesel. How to determine the need to replace the filter element or drain water? When the display screen prompts the "Water In Fuel" alarm, the moisture content is greater than 5% when manually draining, or the fuel pressure drops by more than 0.5 bar, it is necessary to drain or replace the filter element in a timely manner (it is recommended to operate every 500 hours or when the cumulative separated water volume reaches 1L). The Caterpillar 5134490 oil-water separator adopts a stainless steel filter and a coalescing filter design, which efficiently separates 99.5% of the moisture and impurities above 5 μ m in the fuel. It is suitable for all series of engines, intelligently monitors the moisture content, reduces injector corrosion, and extends engine life. If you are interested, please add my contact information directly:+86 15888032469 Or send me an email: allen@perkins-rx.com
Read more
What Caterpillar devices are compatible with the 4509695 control screen? Mainly suitable for Caterpillar C4.4, C6.6, C7.1 generator sets and construction machinery such as 320GC, 336GC excavators, 950GC loaders, etc., supporting seamless docking of multiple models. For specific compatible models, please contact us. What are the core functions of this control screen? Integrated intelligent touch interface, real-time data monitoring (speed/oil pressure/water temperature), fault self diagnosis and remote start stop function, supporting switching between Chinese and English, suitable for equipment management under complex working conditions. The Caterpillar 4509695 control screen adopts high-strength tempered glass touch panel, which is resistant to vibration and dust, displays real-time equipment operation data, supports fault warning and remote control, adapts to generator sets and construction machinery, and improves operation efficiency and maintenance convenience.
Read more
